EU Battery Regulation and NiMH Compliance Guide

Short answer: NiMH cells and packs sold in the European Union are covered by the EU Battery Regulation (EU) 2023/1542, RoHS, REACH and the Packaging and Packaging Waste Regulation (PPWR). A complete supplier file contains the CE declaration where applicable, RoHS and REACH statements, battery Regulation conformity documents, PPWR packaging information, the UN38.3 transport report and the MSDS.

This page summarises the documents Weijiang Power provides to EU buyers. It is commercial guidance, not legal advice; the importer remains responsible for final conformity assessment in the destination country.

Which EU rules apply to NiMH batteries

Rule What it covers Document a buyer receives
Battery Regulation (EU) 2023/1542 Placing portable batteries on the EU market: conformity, labelling, producer registration, collection and recycling Conformity documents, labelling artwork, material composition data
RoHS 2011/65/EU Restricted substances in electrical and electronic equipment, including battery packs supplied with equipment RoHS declaration and test report (IEC 62321 method)
REACH 1907/2006 Substances of very high concern and safety information REACH statement and SVHC declaration
PPWR (EU) 2025/40 Packaging placed on the EU market, including blister cards and retail cartons Packaging material declaration and recyclability information
LVD 2014/35/EU and EMC 2014/30/EU Chargers and equipment that incorporate the battery CE declaration for the charger or appliance
UN38.3 and MSDS Transport of cells and packs by air, sea and road UN38.3 test summary and MSDS

For a standalone NiMH cell, the primary CE-relevant files are RoHS, REACH and the Battery Regulation. LVD and EMC normally apply to the charger or the finished appliance around the battery, not to the cell on its own.

EU Battery Regulation timeline that matters to buyers

Date Obligation What it changes for a purchase order
18 February 2024 Regulation applies, replacing the Battery Directive 2006/66/EC Conformity and labelling references move to the new regulation
18 August 2025 Due diligence obligations for large economic operators Brands may request sourcing and material traceability data
18 August 2026 Labelling requirements: separate collection symbol, capacity and chemistry, QR code Packaging artwork must be updated before the season starts
18 February 2027 Battery passport for industrial, LMT and EV batteries Portable NiMH cells are outside the passport scope, but data systems are shared
2031 onward Recycled content thresholds for specified battery types Material documentation becomes part of supplier qualification

Documents to request from a NiMH supplier

  1. Battery Regulation conformity statement naming the model and the manufacturer.
  2. RoHS declaration and test report using IEC 62321 methods, for the exact cell or pack.
  3. REACH statement covering the current SVHC candidate list.
  4. PPWR packaging information for the retail packaging actually shipped.
  5. UN38.3 test summary and MSDS for transport, valid for the shipped model.
  6. ISO 9001 and ISO 14001 certificates for factory qualification and retailer audits.
  7. BSCI or equivalent social audit where the buyer's brand requires it.
  8. Labeling artwork showing the collection symbol, capacity, chemistry and QR code position.

Labelling checklist for NiMH cells and packs

  • Separate collection symbol printed on the cell or pack, or on the packaging where the cell is too small.
  • Capacity in mAh and nominal voltage on the pack label.
  • Chemistry identification (NiMH) and polarity marking on the pack.
  • QR code linking to the battery data required by the regulation.
  • Producer identification and EU importer details on the retail packaging.
  • Language of the destination market for safety instructions.

United States: what changes

Requirement Scope Buyer use
UN38.3 and 49 CFR transport rules Air and ground shipment of cells and packs Freight booking and carrier acceptance
UL 2054 or UL 1642 evaluation Battery packs and cells for end products Retail and product safety review
FTC labelling and Prop 65 warnings Consumer product labels and California sales Retail packaging artwork
MSDS Workplace and transport safety communication Warehouse and carrier documentation

The US does not have a single federal battery regulation equivalent to the EU Battery Regulation, so compliance is driven by transport rules, product safety standards and retailer requirements. Buyers should confirm the exact standard with their retailer or certification body.

Common compliance mistakes

  • Using a certificate that names a trading company instead of the factory.
  • Shipping packaging artwork that still shows the old Battery Directive reference.
  • Treating RoHS as covering REACH, or assuming a CE mark on a charger covers the cells.
  • Requesting UN38.3 for a pack model that differs from the shipped configuration.
  • Omitting the collection symbol because the cell is small.

Frequently asked questions

Is NiMH covered by the EU Battery Regulation?
Yes. Portable NiMH batteries fall within the scope of Regulation (EU) 2023/1542, which replaced the Battery Directive 2006/66/EC from 18 February 2024.

Do NiMH batteries need CE marking?
The CE mark applies to the product under the applicable directive. For a standalone NiMH cell the relevant files are RoHS, REACH and the Battery Regulation; chargers and appliances that use the cell carry the CE mark under LVD and EMC.

Is a battery passport required for NiMH packs?
The battery passport applies to industrial, light means of transport and electric vehicle batteries from 18 February 2027. Portable NiMH cells are outside that scope.

Which test method is used for RoHS on batteries?
IEC 62321 is the standard used for the determination of restricted substances in electrotechnical products, and it is the method referenced in the RoHS test reports Weijiang Power provides.

When do the new EU labelling rules apply?
The labelling obligations under the Battery Regulation apply from 18 August 2026, so packaging artwork should be updated ahead of that date.

Does PPWR apply to battery blister cards?
Yes. Blister cards, color boxes and display cartons placed on the EU market are packaging under PPWR (EU) 2025/40 and must meet its material and recyclability requirements.